Plywood or drywall: the differences and advantages

When building a house as well as finishing it, it is very important to decide on the materials to be used. So what is better, plywood or drywall, ask themselves those who are faced with types of finishes for the first time. Both of these materials are quite economical and are used almost always.

Of course, plywood is a more environmentally friendly product, it is made of natural material, and drywall is nothing but ordinary cardboard, soaked in a special composition.

Plywood is great for laying on the floor under the laminate, and drywall is used to align walls or create various design solutions inside the house.

It should be taken into account that drywall is resistant to moisture. Therefore, it is often used in the kitchen, bathroom, or other places related to dampness.

For the interior of the house from a timber, it will be better to have drywall, because when the temperature drops condensation occurs, and plywood does not like moisture and can warp.

When creating interior partitions, they have not yet come up with the best plasterboard material, so it remains to recognize him as a palm. However, such walls are quite thin, with low sound insulation.

It does not withstand heavy loads and, naturally, is inferior to natural wood, but it has a very smooth and smooth surface and does not depend on the vagaries of the weather.

What is the best choice for home?

What to take instead of drywall, everyone decides for himself, but for the alignment of the ceilings and walls better material has not yet been invented. Gypsum plasterboard, or gypsum board, fire-resistant and moisture-resistant, is used not only indoors, but often outside. This material even protects the facade from the wind, and is also used for restoration.

For interior use two types of plasterboard: reinforced heavy-duty and flexible sheets. Unlike conventional drywall, Knauf has excellent sound insulation properties and is also a good insulation. If necessary, drywall can be painted several times, which means to change the design of the room.

The repainting plywood does not like and does not look so aesthetically pleasing, it is better to apply wallpaper on it, if it is chosen as the basis for the walls.

Each type of GCR is different in its own way and is used in various conditions. The moisture-resistant look is intended for baths, and heavy-duty - for walls and ceilings, which can be performed in several levels. In addition, this material is relatively inexpensive.

It is not necessary to wait for such properties from plywood, it not only burns better, but also transfers moisture worse, but it is also often used in construction.

Some contractors do not like to mess with drywall, so they offer plywood as a plating, but do not compromise, choose quality.

Differences and advantages of materials

1. Moisture resistance and fire resistance. Do not forget about the benefits of drywall.
2. Material cost.
3. Installation of flexible structures is not possible when using plywood, so the more complex the design of the premises, the less chances this material has.
4. It is difficult to apply wallpaper and other finishing materials on plywood, as it has different impregnations, which degrades the quality of work.
5. When installing drywall, you can do with a minimum of tools and skills, it is very easy to use.

However, if the room is dry and the strength of the walls is necessary, then it is possible to choose plywood for the cladding works.

Drywall is very convenient for installation of wiring and other elements of engineering networks. He easily gives in to processing, hides roughnesses of walls and a ceiling. For plywood trim, smoother surfaces are needed, otherwise the material starts to play.

Where these finishing materials are used

Depending on the thickness, you can use either drywall or plywood, not only for covering walls, floor and ceiling, but even when making furniture. Drywall can replace shelves and niches, from it you can make any arch or make walls concave. Interesting design solutions are almost always carried out through the use of drywall. Therefore, this material has a wider range of applications.

Those who are not interested in delights, may prefer a tree that is environmentally friendly and strong, but will cost more. How exactly to install partitions, you can see on the site, but if you do not have the skills to align the walls and create new ones, it is better to contact the experts.

If desired, even a brick wall can be insulated with plasterboard, and at the same time even the surface.

And it will take not so much time, and sound and heat insulation will increase significantly. GKL sheets will also be appreciated by those who are building a house from a bar, because in order to keep warm, it is enough to insulate the walls with these materials so that the house is comfortable even in winter.

Cost calculation and choice of material

Different types of edges are very convenient for the realization of any design ideas, so when choosing a finish, do not forget to clarify the difference.

After calculating the required amount of finishing material, the metal profile is installed, after which the plates are attached to the profiles using ordinary self-tapping screws. After that, all seams are sealed with a special putty and, if necessary, plastered or coated with other finishing materials.

Do not save on materials, get them the highest standard. If you wish, you can always clarify not only the desired amount of material, but also its cost.