How to increase the water pressure in the water supply

Quite often, residents of country cottages, houses, and city apartments face weak water pressure in the plumbing system. And if for personal needs and domestic purposes you can still make a certain amount of water and wait until it reaches a large capacity, household appliances, a dishwasher or washing machine, a flowing water heater and other equipment will not function without standard pressure. Problems may arise with irrigation of the site in the summer or rest in the bath complex in the winter. In such situations, the owners think about how to increase the water pressure in the water supply system with available means, taking into account all operational and technological requirements, their own wishes and preferences of all family members.

Study of the problem of low pressure

Causes of low water pressure

In order to comprehensively solve the problem with the normalization of water pressure should carefully examine the causes and factors of the appearance of weak watercourse. Sometimes pressure reduction can be associated with a large water intake, as a rule, in the summer, when there is an active irrigation of the garden plots. In addition, the following reasons should be noted:

• pump failure or erroneous calculation of its power at the distribution station;
• water leakage through a breakthrough in utilities;
• water pipelines pipe debris or corrosion;
• lack of power supply.

Breakthrough communications

Jacuzzi, washing and dishwashers, watering and heating systems first begin to respond to low pressure problems in the water system. Therefore, planning how to increase the water pressure in the water supply system should immediately calculate the maximum power of work in the system, taking into account the simultaneous inclusion of several consumption points. For example, if you want to take a jacuzzi, the consumer should not think about whether he can turn on the washing machine or not.

For household objects, the estimated head pressure at various points should be 1.5 atmospheres.

There are several effective and optimal ways to increase water pressure. Consider the most popular and effective technologies.

Installation of the pump

You can satisfy the consumer needs of the apartment or house residents by purchasing and installing a pump. When selecting pumping equipment, consumers should first of all pay attention to the power and performance of equipment. It should correspond to the estimated water flow or well flow rate. For reference, take the maximum rates of water consumption per unit of time in the most intense range of water consumption.

Diagram of the pumping station

Pumps are connected in front of the intake points. Their functioning can be regulated in various modes: manually or automatically. You must be careful when connecting the pump in the central water supply system.

By increasing the pressure in your apartment or house, you can significantly reduce this level in neighboring facilities.

Use of pumping stations

Pumping station for country housing

Global problems with the normalization of water supply of any objects will be solved by a high-quality, well-chosen pumping station, which is complemented by a cumulative capacity. Volumetric tank is useful in the case of a complete lack of water or a significant reduction in pressure in the overall system. The calculation of the size of the storage tank is based on the daily need for clean water of all residents of the house and working household appliances.

The installation of the pumping station and storage tank should be made taking into account their further service and process maintenance. Installation of the hydraulic system can be provided in the basement, on the roof, in a special extension or even in the ground. It should be remembered that the tank should be regularly subjected to preventive cleaning.

The home pumping station in operation

The independent hydraulic system can fully provide the family with water, which will accumulate in the tank. The constant flow of water to the operational water distribution points will be carried out using a pumping station. Modern water supply units operate in automatic mode, with convenient multifunctional adjustment of the supply time and water volume, and even with the identification of the need for recharging the hydraulic system. For example, with a standard pressure level in the central water supply system and a fully filled container, the pump will not be turned on. When the pressure in the general system drops, the pump will automatically turn on, which will supply water to the connection point with the required pressure level.

Thus, knowing how to increase the water pressure in the water supply system and picking up the necessary equipment, you can provide your family and garden area with the required volume of water around the clock.

Video

Learn how to choose a pumping station by watching the following video:

Now you can build and install it: