Which grout to choose for tile

Each process has a final stage - design. So, even if you flawlessly coped with the laying of the tile, its appearance will be unpresentable, until all the seams are sealed. It's enough just to cope with this: it is enough to buy a special grout and treat the surface according to the package instructions. But, going to the store, everyone will face the problem of choice, because the range is really impressive. To decide what kind of grout to choose for the tile, you need to have relevant information.

Modern material

Which grout to choose for tile Silicone grout

Trowel mixes are presented as a homogeneous mass , which can be made on the basis of cement or polymers. In addition, there is a distribution on the color palette. Thanks to the grouting, the tiled canvas will find a complete beautiful look, and it will become a bright accent of the interior of the room. In addition to decorative functions, the mixture will perform and protective - to protect from:

  • high humidity,
  • sudden temperature drops;
  • dust and dirt;
  • sunlight;
  • insects;
  • fungus and mold.

The stage of sealing joints in rooms with high humidity is especially relevant: kitchen, bathroom, toilet and swimming pool.

Mold, with active reproduction, releases spores into the atmosphere that are harmful to the human body and can cause both allergies and other diseases.

The entire range can be divided into two large groups with several subgroups.

Which grout to choose for tile Cement Fugue


  • Portland cement;
  • Portland cement and sand.


  • epoxy;
  • furan resin.

Which grout to choose for tile Polymer with additives

In addition, various additives are added to the compositions, due to which as a result, the trowel mixture has a fairly high quality indicators:

  • homogeneous structure;
  • good dispersibility over the surface;
  • good filling of voids;
  • uniform drying.

Which grout to choose for tile May be produced in the form of powder

The release form may be different: pasty (finished to use) and dry powder (it is required to be independently dissolved with water).


Which grout to choose for tile Sealant suitable for joints

Many decide to replace the grout with a simple sealant or sealant. Previously, these compounds were not particularly popular, as their characteristics and performance were at a low level. Nobody wanted to spend their money and time. Today, thanks to more modernized technologies and innovations, manufacturers have replenished the range of sealants, which are now not inferior in quality to the grout. In addition, the new products are presented in a wider range of colors, which makes it possible to select a suitable shade without any particular difficulties. The remains can be easily wiped with a wet sponge.

The color palette

Which grout to choose for tile The color palette is varied

In addition to the range of components, there is also a breakdown depending on the shades. How to choose the color of grout correctly, so that it is well combined with the laid tile? Only with the right choice of shade will it be possible to easily correct the existing minor defects during installation, as well as to emphasize the beauty of the new finish. In order not to make mistakes, you should follow simple tips:

  • the color on a small sample in the hardware store will seem lighter than over a large area;
  • going for a purchase, grab a sample of tile to follow the basic color on the walls;
  • the classic selection rule is simple: the color of the grout should correspond to the darkest or lightest shade of the tiled gamut; geometric pattern;
  • when choosing a sharp contrast between the tile and the trowel mix, everything should be carefully weighed and considered: whether it will paint the tile and what color it will be after drying;
  • white is a universal color, so it’s better to stay on it, if the choice was never made.

When self-designing an interior, one should not forget about the important generally accepted rule: there should be no more than three primary colors in an interior. What color of grout to choose in this case? Pay attention to special mixes with effects. They will cost a little more expensive, since they are made on the basis of epoxy resins with the addition of decorative components.

Which grout to choose for tile Grout for gold glitter tile

The most accessible and simplest type is mother-of-pearl. Tile joints will glitter and cast mother of pearl. If the composition includes gold or silver chips, it will create a sparkling effect.Particularly interesting effect will be seen if the bathroom has windows and sun rays penetrate inside.

It is better to make a choice in favor of not the shade of the tile, but of furniture or sanitary ware.


An equally important issue, the consideration of which will allow you to quickly narrow the circle of choice and make the right purchase. Many manufacturers are ready to offer their customers high-quality products. That is why it is rather difficult to say which brand of grout is better and better. If we talk about the most popular for home use, then this cement mixture. But when finishing tiles in a bathroom or kitchen, it is best to give preference to epoxy grout.

Which grout to choose for tile Elastic grout Ceresit

Consider the brands that consumers most often choose:

  1. Ceresite is one of the most famous brands with a century of history. An important distinction of the products is high quality as well as resistance to ultraviolet radiation.
  2. Atlas is a popular brand in the domestic market. Grout have excellent performance at an affordable price.
  3. Mapey - mastic from the Italian company. It is a guarantee of quality and reliability. The advantages are water-repellent properties, which is important for baths and pools.
  4. Sopro is a German brand with a world name and a long history. Initially, all products on the market were limited to Portland cement, and today this range has been significantly expanded.

In addition, in order to know exactly which grout to choose, you need to know in advance some information that will help with the purchase. First of all, answer the following questions:

  1. On what basis will the tile be installed: strong (brick, concrete and plaster) or deformable (plasterboard structures and self-leveling warm floors)?
  2. What effects will be applied to the surface: mechanical (friction with metal sponges), cleaning with chemicals, exposure to high humidity and high temperatures?
  3. What material is selected for facing: marble, ceramic tile, mosaic and other?
  4. What is the width of the seams?
  5. What is the size of the tile?

Which grout to choose for tile Consider the width of the seams and the size of the tile

. Do not forget to listen to the advice and recommendations of friends, colleagues and relatives who have gone through this stage during the repair.

Undoubtedly, the range of mixes is very large, and the result may be the most unpredictable. The easiest and inconspicuous tile can play with new colors.


Related Articles