Sheathe house board in an overlap: tips

Today, natural materials are becoming again popular not only for construction, but also for building upholstery. One of these materials is wood, which is not only environmentally friendly, but also gives the structure an unusually attractive appearance. Sheathing of the house can be performed in different techniques, but the trim board overlapped looks best of all. This option is usually used when a low building is finished, a country house in a country style. The board can, after plating, be coated with varnish, paint, soaked with special oils in order to preserve its original appearance.

The process itself, how to sheathe a house with a trim board with its own hands, is not so complicated, but it is necessary to strictly observe all the conditions and steps, use quality boards, special finishing elements in the form of corners. For work the board of two types and angular elements is used. The inner one acts as a frame, the corners are mounted for the inner and outer parts of the facade. The outer board will be the front.

Installation of the internal board

Covering of the house with the board is carried out according to pre-made marks, the frame for fixing the outer board is obligatory. During work, it is recommended to use a conventional hammer; a special nailing gun is not used. It is this peculiarity that makes the work of covering the house with a tree so long, requiring patience.

If self-tapping screws are used to fasten the inner board, a screwdriver can be purchased. This will speed up the work, make it more qualitative, but the inner row will still have to be fixed with nails, they must have a length of 80 mm. Before you begin to fix the board, you must first pre-treat it with an antiseptic and dry it. After that, each element is cut to obtain the required length. Face the board is put out, the bend should be directed upwards.

Installing the outer plank

After all the inner planks have been installed, it is necessary to proceed to the fixing of the outer planks. How to do it correctly?

Installation is carried out in an overlap, each previous one having to be laid on the adjacent board with an approach of 250 mm.

An overlap is preliminarily marked on each board so that the work is carried out quickly and efficiently. When drying, the material may be slightly deformed. Therefore, during the purchase is best to use well-dried wood.

Tools for work:

• screwdriver;
• jigsaw;
• hammer;
• ruler and construction level.

During the exterior plating of a house, it is necessary to apply a building level so that the surface of the facade finish is smooth and beautiful.

There are many options for fixing the outer edging board:

1. In the rustic, with lower end parts projecting at an angle, the groove is made below.
2. With bevel in tongue. A complex profile is applied, the external lining is beautiful and stylish, the thickness of the board is considerable.
3. In semi-stick. The surface of the wall is smooth with small triangular grooves, the board is cut at an angle, the slotted connection is not used, the overlap is angular.
4. With a quarter slope. The surface of the facade is smooth, the profile for the connection is applied complex
5. Straight quarter. The surface of the facade is smooth and beautiful, the board is laid firmly and tightly, the moisture does not get any opportunity to flow under the cladding. The grooves for fasteners are cut at a right angle, the connection is one of the most reliable and simple.
6. To the sheet pile. For stacking boards used tongue-and-groove connection, it is important to cut the grooves using a template. Otherwise, reliable docking will not work. The facade has a smooth and beautiful surface, the moisture does not flow into the wall, drafts will not be disturbed, as well as heat loss.
7. Mounting to glue. The board is glued, there is no overlap.

Useful tips

When doing a wooden plank at home, experts advise you to follow certain rules that will ensure a beautiful and durable finish:

1. For work, it is best to take a board, okshgovannuy on the one hand, but on the other - not. Rough side material is mounted outside. Then the primer, and then the paint will stay much better and longer, and the appearance of the house will turn out more attractive.
2. Boards do not need to be nailed only at the bottom and top, as the material will easily split, absorb moisture. It is necessary to use the option of fastener in the run, when the boards are fixed on the surface of the facade with a step of 30-45 cm, i.e. in a checkerboard pattern.
3. Wood of various breeds can be used for covering the house. This may be cedar, pine, spruce, mahogany.Based on their experience, it is best to use cedar boards. They are not only durable, but they are easy to handle and have a beautiful appearance. Mahogany is difficult to process, it is difficult to drive a nail into the surface, although it does not warp over time. Pine has many useful properties, but for external use it is not too good, as it is easy to warp, splits. Spruce is rarely used for exterior work on the facade, although its performance is much better than that of pine. Spruce boards abound with knots, and this is not the best effect on quality.
4. House covering is best done with ordinary steel nails rather than galvanized. The problem is that the galvanized layer is easily torn off during installation, and the nails quickly rust under the influence of moisture. Stainless steel is much more expensive, but the quality of finish is higher.

The edging of the edging board is an attractive and simple option for any country house. Such a facade is not only stylish, but also environmentally friendly. After laying the board can be varnished, painted, soaked with oil. It all depends on the fantasy of the owner of the house, the overall style of construction.