In order to choose a hammer drill, the master often needs a lot of time. And if you really need the best impact drill, we recommend using our rating, which will help reduce the time spent searching. It is based on real user reviews, technical specifications and features that are inherent in the described models.
Guessing which impact drill is not best, and if the allocated budget is unlimited and you need the tool for frequent use, It is worth unambiguously choosing more expensive models. The most successful devices in this class are Metabo SBE 900 Impuls and Bosch GSB 21-2 RCT.
|Metabo SBE 900 Impuls||Bosch GSB 21-2 RCT|
| || |
|Cartridge Type||quick clamping||quick clamping|
|Max. cartridge size, mm||13||13|
|Number of speeds||2||2|
|Frequency of beats, beats. / min||0 - 59000||51000|
|Max. drilling diameter in brick, mm||20||22|
|Max. drilling diameter in wood, mm||40||40|
|Max. drilling diameter in metal, mm||13||16|
|Adjustment of turns|
|Spindle speed, rev. / min|| 1 speed: 0 - 1000; |
2 speed: 0 - 3100.
| 1 speed: 0 - 900; |
2 speed: 0 - 3000.
|Support of constant revolutions under load|
|Automatic off when worn brushes|
The model is equipped with a Futuro Plus fast-tightening chuck, and the possibility of reverse is provided . There is no built-in backlight, but there is speed adjustment with the support of their constant number under load.
According to the specifications, the largest drilling diameter in a brick is 20 mm, in metals - 13 mm, in wood - 40 mm. The maximum size of the cartridge is 13 mm, and its fastening type 1/2. It is included in the package in the same way as a long handle, case and depth stop for a drill.
Users give a lot of positive points to this model. In addition, the owners mention some technical features and high versatility of the model.
+ Pros Metabo SBE 900 Impuls
- Cons Metabo SBE 900 Impuls
In summary, we can say that this is not a professional tool, but at home it will allow drilling holes in stone, wood, metals, plastics and ceramic products, for example , tile. The case of the gearbox used is made of a special alloy. It is supplemented with a safety clutch, which ensures safety, for which a well thought-out aerodynamics, which prevent dust from entering the master, are additionally responsible.
The kit also includes: a handle; case; drill depth stop up to 210 mm. Without them, the weight is 2900 grams. At the initial speed, the number of revolutions per minute can reach only 900, and the second - 3000. The largest drilling diameter in the brick is 22 mm, in metals - 16 mm, and in wood - 40 mm. The frequency of shocks is 51000 beats. / min There is no backlight for the model, but there is an option to reverse and adjust the revolutions.
+ Pros Bosch GSB 21-2 RCT
- Cons Bosch GSB 21-2 RCT
As a result, like the previous model, this one is equipped with a 13 mm quick-release chuck with 1/2 fastening. Its functionality includes the choice of torque due to the use of the Torque Control system, as well as the support of a constant number of revolutions due to the Constant-Electronic system. The speeds here are also 2, but the power is significantly higher - 1300 watts.
The average price models of impact drills continue to be rated, here we selected the following models - Sparky BUR 150CET KL, Makit HP 2051 F and Bosch GSB 1600 RE.
|SPARKY BUR 150CET KL||Bosch GSB 1600 RE||Makita HP 2051 F|
| || || |
|Type of cartridge||fast-locking||fast-locking||fast-locking|
|Max. cartridge size, mm||13||13||13|
|Number of speeds||1||1||2|
|Max. drilling diameter in wood, mm||25||30||45|
|Max. drilling diameter in metal, mm||13||12||13|
|Spindle speed, rev. / min||500 - 2500||0 - 3000|| 1 speed: 0 - 1200; |
2 speed: 2 - 2900.
|Frequency of blows, beats. / min||37500||25000|| 1 speed: 0 - 1200; |
2 speed: 0 - 2900.
|Support for constant speed|
|Automatic shut-off when the brushes are worn|
+ Pros Sparky BUR 150CET KL
- Cons Sparky BUR 150CET KL
The model really has many advantages, for which she got into the rating of impact drills for the house. This model has a torque adjustment, as in the more expensive models and is supplied with a 13 mm quick-clamp cartridge. The built-in motor power is small and reaches 600 watts. It allows you to achieve a frequency of beats per minute of 37500, but it works only at one speed in the range from 500 to 2500 rpm.
There is a reverse and speed adjustment, but the backlight is not. At the same time, there is the option of keeping a constant number of revolutions under load and brushes that are disconnected when worn. The model package is not very wide, but includes an additional handle and an accessory for limiting the depth of drilling.
+ Pros Bosch GSB 1600 RE
- Cons Bosch GSB 1600 RE
For home conditions, the model has a fairly powerful electric motor. Design features allow you to achieve 25,000 blows at a maximum speed of 3000 rpm. The number of revolutions can be adjusted using a special wheel on the handle. The functionality is expanded due to the reverse, but there is no built-in backlight and only one speed.
Nevertheless, the drill copes with drilling a brick, in which you can make holes with a diameter of 1.6 cm, metal - up to 12 mm and wood - up to 30 mm with it. The mass of the model is small, which is especially important for home tools and is 1900 grams. In addition to the 13 mm quick-release chuck, the hammer drill kit includes a depth stop for the drill to 210 mm and a second handle.
The functionality of the model is enhanced by the reversal option and the built-in illumination of the drilling site. Power model is relatively small and is 720 watts. There is an adjustment of revolutions, but there is no retaining a constant number of revolutions, as well as automatic disconnection of brushes when worn.
As for the physical parameters of the model, its weight is 2300 grams, and the length of the electric wire is 2.5 m. For home use it is more than enough. A bonus for the user will be the equipment, expanded due to the presence of a case, a side grip and a depth gauge. Opinions about the weight, the cost of the model and the quality of work of the cartridge for different users are contradictory, but the disadvantages are unequivocal.
+ Pros Makita HP 2051 F
- Cons Makita HP 2051 F
The Makita HP 2051 F model in the average price range is classified as the best hammer drill with two speeds. It can work in normal mode, and with a blow. As for the speeds, they have a fairly wide range of revolutions and when changing values, the frequency of impacts also changes.
With the selected first speed, the number of revolutions can be from 0 to 1200, and the maximum number of strokes - 24000. At the second, the number of revolutions increases to 2900, and the frequency of impacts - to 58000.
|Interskol DU-13 / 750T T||Bison MASTER DU-810 ERM2|
| || |
|Type of cartridge||key||key|
|Max. cartridge size||13||13|
|Chuck size, mm||1.5 - 13||1.5 - 13|
|Number of speeds||1||1|
|Frequency of blows, beats. / min||44800||42000|
|Max. drilling diameter in concrete, mm||13||13|
|Max. drilling diameter in wood, mm||30||20|
|Max. drilling diameter in metal, mm||13||10|
|Adjustment of turns|
|Spindle speed, rev. / min||2800||2800|
This model is supplied with a key cartridge for 13 mm drills. The design of the device is based on the use of an electric motor operating in the same speed range. The number of revolutions during operation will vary in the range from 0 to 2800 per minute. While they can be carried out in reverse mode. The model has no backlight, but the adjustment of revolutions is carried out.
The mass of the model is 2.5 kg, but this is inevitable since the tool is a percussion, and the frequency of impacts with this drill can reach 44,800 per minute. This ultimately guarantees you a longer service life. And at the expense of the convenient handle the drill well lies in a hand.
+ Pros Interskol DU-13 / 750T T
- Cons Interskol DU-13 / 750T T
Like most budget models, this drill has a very modest grade. It is expanded only by the chuck, the side grip and the depth limiter for the drill to enter. As a result, it is worth noting that with frequent operation, the model at the end of the warranty period becomes of little use for work. For example, brushes wear out, there are problems with the speed controller. As for the controversial points in the reviews, they mostly relate to ease of use, in particular, the cartridge, and the key with which it is used.
+ Pros Bison MASTER DU-810 ERM2
- Cons Bison MASTER DU-810 ERM2
This model can be used for forming holes in metal, wood and brick due to the high power of the installed electric motor. She is 810 watts. In this case, the drill only works in one speed mode, which should be taken into account when choosing it as a tool for home use. It is possible to adjust the speed by varying the intensity of exposure depending on the associated conditions. It is worth noting that the key cartridge is used.