One of the first conditions for a healthy lifestyle for most people is a daily eight-hour nap. In sum, a third of life is spent on rest and recuperation, so it is very important to choose a quality sofa for sleeping every day, and the rating of the best models collected in this review will help you decide in the process of making this difficult decision.
The main element of the sofa for daily sleep is its spring unit, which can be dependent, independent or instead of it, a foam rubber filling is used. This element of the sofa became the main criterion by which we divided all selected sofas into three groups. The basis for the collection was the reviews, opinions and ratings of users of this furniture placed on various resources on the Internet.
This design of spring units is called "Bonnel". All elements in it are rigidly interconnected, so if the force was applied to one of the springs, then others will begin to move along with it, which does not allow the surface of the bed to exactly repeat all the contours of the human body. Since the effort is almost always concentrated at one point, over time, such a framework is inevitably pressed through in the middle section. The result is a hammock effect.
The only and indisputable advantage that sofas with dependent spring units have is their cost. These are the best sofas for sleeping, if the main selection criterion is the desire (or necessity) to save on the purchase.
Although during installation it requires a lot of space, but it is possible to put it close to the wall - in some cases this is a significant plus when choosing between different models. When folded, the length is 241, depth is 108, height is 91 cm, after folding the bed becomes 160x200 cm.
The design of the model combines soft, rounded and more expressive straight lines lines, among which stand out wide armrests, on which the console from the TV or air conditioner will not get lost.
The transformation is performed according to the eurobook (alternative) scheme, which requires a minimum of actions and is characterized by maximum reliability, since it does not use complex mechanisms. It is only necessary to extend the side to yourself and lower the back to the formed space. After folding the sofa turns into a full-fledged berth, which will be comfortable even for a tall person.
Bedding can not be stored in a separate closet - there is enough space for them inside the case.
When folded: length 230 depth 106 depth 85 cm height, unfolded sofa has a spacious enough sleeping place - 202x149 cm, respectively. The design is made in the classical form - the sides contrast with the berth and are additionally encrusted with wooden armrests.
The eurobook system is used as a transformation mechanism; this sofa is not recommended to be placed very close to the wall, as the pantograph type of transformation system is used. If you put the sofa close to the wall, then at the transformation the back will surely rub against it.
The Eurobook transformation system leaves enough space for a box for bedding to fit in the case, i.e., the question of their storage is removed.
The springs used in such constructions differ somewhat from those used in dependent spring blocks, but they are not related. According to the manufacturing technology, each of the springs is packed in a separate fabric cover, which are then connected into tapes, from which the entire spring block is finally assembled.
Since each spring is pressed by itself, such a mattress has excellent orthopedic properties - it most precisely follows the contours of the human body. An additional advantage of this spring block is the absence of squeaks and sagging. Since the springs do not touch each other, their movements are virtually silent, and an independent stroke allows the sofa to keep its original shape longer.
Such a spring block is more expensive than the usual Bonel, but this is its only drawback. In the ranking of sofas for daily sleep, models with independent springs invariably occupy the first lines. Sofas with such an orthopedic base are the best solution for sleeping, but have a high price.
Thanks to independent springs, the spring unit, which is completed with Ascona Sunrise, belongs to the category of anatomical ones, which maximally repeat the shape of a human body.The mattress is divided into 7 zones, the rigidity of which is designed for optimal support of the spine during sleep. Soft coating makes landing deep, so it is equally comfortable to sit during the day or lie down at night.
The folding of the sofa occurs through the transformation mechanism "Removal of Eurosof" - one movement is enough to lower or raise the backrest. The mechanism itself is designed for daily use throughout the entire life cycle.
When folded, the dimensions of the sofa are 246 cm in width, 130 cm in depth and 91 cm in height. After folding, the bed size is 200 by 140 cm. Bedding can be stored in a special box for the cover of which there is a separate holder - you do not have to hold the sofa with one hand and get things out of it with the other. The sofa is equipped with three throw pillows 56 x 58 cm in size and a removable cover, so it is easy to clean it from stains.
Externally different from the counterparts in the armrest built into the body of a full shelf for books or other accessories. On top of the armrests are lining-table tops - so along the edges of the sofa there are mini coffee tables for newspapers or remotes from home appliances.
Despite the classic version, the shape of the sofa has a modern look and fits freely into the interiors of Hi-Tech style and the like. When folded, the dimensions are 235 cm wide, 119 cm deep, 92 cm high. After unfolding, the berth size is 210 by 140 cm. The Askona branded seven-zone spring unit with independent springs provides the body with a comfortable rest in a sitting and lying position, streamlined shape of the sofa and soft corners make it possible to use it even in children's rooms.
Unfolding is performed using the MultiComfort accordion mechanism - without unnecessary movement and effort. The peculiarity of the mechanism of the Multicomfort accordion is that a high, full-fledged spring block is used in the sofa. This is a great rarity for the transformation type of accordion, as often these sofas use foam rubber fillers and similar materials, which in their orthopedic qualities lose to spring blocks.
The classic look of the model Anderson Benedict hides in itself the combined functionality of the sofa and a full bed. This result was achieved thanks to the use of the “walking eurobook” transformation mechanism, due to which after unfolding the sleeper looks like a completely flat surface. All that needs to be done for unfolding is to pull the seat and turn the back to the empty seat. In this case, you can not be afraid to scratch the floor, since the seat does not go out, namely, "oversteps" and immediately stops in the desired position.
The sofa looks very solid in the interior, but, despite its massive forms, it creates the impression of lightness and aristocratic grace. When folded, its dimensions are 241 cm in width, 112 cm in depth, and 105 cm in height. The bed size after folding is 202 by 152 cm.
Bedding can be stored in a linen box , free access to which is opened after moving the seat.
The back and the base of the seat are made on the basis of independent spring blocks, the possibility of ordering an upholstery option from fabric or artificial leather is all three-seater sofa "Austin" from the line of furniture "Comfort" from the manufacturer Pinskdrev.
The smooth surface of the sidewalls can be used as coffee tables on which evening newspapers, writing-materials, manicure sets and other useful trifles can be placed. Removable sidewalls, also used as separate drawers for bedding. The cover of the sofa is easily removed.
Together with the sidewalls when folded, the dimensions of this model are 264 cm wide, 122 cm deep and 120 cm high. The bed size after folding is 195 by 137 cm.
The eurobook mechanism is used to unfold the sofa, due to which a sleeping place is formed as a result of just two movements - moving the seat and lowering the backrest. Behind the sofa there is an additional partition, thanks to which it can be placed close to the wall without the fear that the backrest will rub against the wallpaper.
In addition to spring blocks, foam rubber and synthetic winterizer can be used as a sofa filler. Since foam rubber can be of different stiffness, it would be a logical decision to abandon the springs in general and make the entire mattress out of this material. Such sofas keep their shape well enough and accurately follow the contours of the human figure.
However, there is a significant drawback that buyers have to take into account - the rapid loss of foam rubber to its original shape. Over time, the mattress gets loose, sags and does not perform its orthopedic functions - through it you will feel the hard base of the sofa. Although, when using high-quality foam, well-calculated density, it will last a long time without any significant changes.
Although some experts do not recommend using foam-filled sofas for daily sleep, such furniture is often used. First of all, consumers are attracted by the price, which is significantly lower than that of sofas with an independent spring unit.
The wall sofa-bed which is unfolded by means of the transformation mechanism "accordion". As a spring block, polyurethane foam furniture sheets of increased elasticity are used, ideally repeating the contours of the human body and supporting it in the right position for a good rest.
The base of the sofa is made of a metal frame, on which are fixed orthopedic armor, gathered from bent glued birch. Faux suede, fabric or imitation leather is used as the outer skin.
When folded, the size of the sofa is 173 cm wide, 108 cm deep, and 90 cm high, of which 44 cm is the seat. The dimensions of the bed after folding 164 by 206 cm.
For maximum hygiene, a removable cover is put on the mattresses, which can be easily removed before folding.
Available in two versions in size, which differ in the width of the sofa - 228 or 238 cm. The depth in both cases is 89 cm, and height with back is 108 cm. In the unfolded state, the width of the berth is 155 cm and the length is 190 or 200 cm.
armrests - there are no solid parts outside, so the children's room is not a place where its installation is not recommended.
The factory package includes a decorative back, two armrests and two pillows. The mattress is made of high quality polyurethane foam, and when unfolding opens access to a spacious linen box.
The upholstery of the sofa is made of fabric, the color of which is chosen when ordering at the store.
Transformation into a bed is carried out by means of the “euro-sof” mechanism, but it is also possible to order this model with other transformation variants.
The selection of goods is carried out on the basis of reviews, opinions and ratings of users placed on various resources on the Internet. All information is taken from public sources. We do not cooperate with manufacturers and trademarks and do not call for the purchase of certain products. The article is informative.