The objective rating of miter saws can be made only on the basis of the opinions of users who have used the devices for a long time and revealed their advantages and disadvantages in various operating modes. Trapped in the TOP models have excellent factory characteristics, plus the best balance between positive and negative reviews from owners that use them for more than a year. Which miter saw is better, it is worth deciding on the basis of the conditions in which the operation is planned.
A special feature of the devices is an additional mechanism that allows you to move the saw blade in the horizontal plane right during operation. This allows you to make high-quality cuts wide blanks in a single drive pass. The pulling mechanism itself in the presented models was made without any complaints from users.
Single reviews indicate a slight backlash of the disk, with a maximum departure of the guide, but this is a common problem for devices of this class. Because of the pulling mechanism, such saws cannot be installed close to the wall, or you have to make a niche for it.
Dewalt DWS 780 | Makita LS 1216 | Bosch GCM 8 SJL Professional | Ryobi EMS254L | |
| | | | |
Landing disc diameter, mm | 30 | 30 | 30 | 30 |
Diameter of the disk, mm | 305 | 305 | 216 | 254 |
Power, W | 1675 | 1650 | 1600 | 2000 |
The ability of the saw to lean left / right | 49/49 | 45/45 | 47/2 | - / 0-45 |
Adjustment Table left / right, degree | 50/60 | 52/60 | 45/45 | 0-45 / 0-45 |
Max cutting depth at an angle of 45 °, mm | 56 | 107 | 48 | 58 |
Max depth cut at an angle of 90 °, mm | 112 | 107 | 70 | 90 |
Max cutting width at an angle of 90 °, mm | 349 | 363 | 312 | 300 |
Max angle of 45 °, mm | 244 | 255 | 214 | 200 |
Speed control | ||||
Revolutions, about / min | 1900 - 3800 | 3200 | 5500 | 4500 |
Cutting depth adjustment | ||||
Illumination | ||||
Laser | ||||
Soft start | ||||
System for maintaining constant speed under load | ||||
Weight, kg | 24.8 | 26.1 | 17.3 | 16.2 |
+ Pros Dewalt DWS 780
- Cons Dewalt DWS 780
Results . Professional tool for working with wooden blanks. Bore diameter of the disc - 30 mm, full - 305 mm. The maximum engine power - 1,675 kW, plus adjustment of turns. For precise positioning of the disk, the XPS system is used to illuminate the workpiece - the cutting line coincides with the shadow from the disk.The saw is made for professionals who value reliability, usability and versatility.
+ Pros Makita LS 1216
- Cons Makita LS 1216
Results . The saw is intended for work on a tree or plastic. Bore diameter of the disc - 30 mm, full - 305 mm. Engine power - 1.65 kW, without adjusting the speed. The backlight or laser is not included in the factory package - if necessary, they are purchased separately. The best miter saw for joinery workshops that work with large workpieces and require high quality cuts. The big departure of a saw assumes the corresponding weight and the sizes - the device is better for using as the stationary machine.
+ Pros Bosch GCM 8 SJL Professional
- Bosch GCM Cons 8 SJL Professional
Results . Professional miter saw. The diameter of the disc used is 30 mm, and the full diameter is 216 mm. Maximum engine power - 1.6 kW, without adjusting the speed. For exact cut laser pointer is used. There is no built-in lighting for the workplace The saw is useful to those who require reliability, accuracy and quality of cut from the tool. Low weight allows you to use it as a portable model, and if you use it in a pair with a table, the stability and usability are improved by an order of magnitude.
+ Pros Ryobi EMS254L 3001202
- Ryobi EMS254L 3001202
Results . The saw is intended for work with preparations from a tree. The disc diameter is 30 mm, and the full diameter is 254 mm. Maximum engine power - 2 kW, without adjusting the speed. For precise positioning of the disk laser pointer is used, plus the illumination of the working area. Good budget device with the presence of the necessary functions and settings. For professionals, the latter may not be enough, but if you need a saw to make repairs at home, then this model is enough - it will work out its price.
It is not always carpentry that processes such large details that it will be necessary to broach the head of the miter saw, and this mechanism significantly increases the overall cost of the device. The difference in price can be from one hundred to two hundred percent, and there are no differences in working with small details. An important advantage when choosing a device may be the compactness - it just requires less space for installation, plus weighs a dozen and a half kilograms less than analogs with a broach.
If these considerations are important, then the rating of models without a pulling mechanism will help you decide on which miter saw is better.
Dewalt DW 713 | Makita LS 1040 F | Metabo KS 216 M Lasercut | |
| | | |
Bore disc diameter, mm | 30 | 30 | 30 |
Diameter of the disk, mm | 250 | 260 | 216 |
Power, W | 1600 | 1650 | 1100 |
The ability of the saw to lean to the left / right | 48/3 | 45 / - | 47/2 |
Table adjustment left / right, degree | 50/50 | 45/45 | 47/47 |
Max cutting depth at 45 °, mm | 89 | 67 | 45 |
Max depth of cut at an angle of 90 ° mm | 89 | 93 | 60 |
Max cutting width at an angle of 90 °, mm | 162 | 95 | 120 |
Max cutting width at an angle of 45 °, mm | 114 | 93 | 80 |
Turn adjustment | |||
Speed, rpm | 5000 | 4600 | 5000 |
Adjustment cutting depths | |||
Highlighting | |||
Laser | |||
Soft start | |||
System for maintaining constant rpm under load | |||
Weight, to r | 13. 6 | 11 | 9. 4 |
+ Pros Dewalt DW 713
- Dewalt DW 713
Results . Bore diameter of the disc - 30 mm, full - 250 mm. Maximum engine power - 1.6 kW, without adjusting the speed. Laser pointer and lights are missing. Opinions of users characterize the DW 713 as a reliable workhorse that, regardless of external conditions, will produce a good result. A good choice for domestic and professional use in the processing of small-sized pieces.
+ Pros Makita LS 1040 F
- Cons Makita LS 1040 F
Totals .The tool is designed to work with wood, plastic, aluminum and laminate. Designed for discs with a bore diameter of 30 mm, full - 260 mm. Maximum engine power - 1.65 kW, without adjusting the number of revolutions. There is an illumination of the working area, the laser pointer is missing. Reliable miter saw, but with the likelihood of periodic vagaries of electronics. If there is no fear to get into the control unit to replace the fuse or to correct contacts, then the price-performance ratio, compared with peers from competitors, is in favor of this model.
+ Pros Metabo KS 216 M Lasercut
- Cons Metabo KS 216 M Lasercut
Results . End saw for cutting small wooden blanks. Works with discs of 30 mm in diameter, full - 216 mm. 1.1 kW electric motor, without adjustment of revolutions. It is completed with illumination of a working zone and a laser pointer. The saw is definitely not suitable for professional work - it is designed for a small disk and the overall rigidity of the structure, provided it is used continuously, leaves much to be desired. Although, subject to the ability and desire to periodically sort out and lubricate the chassis, it can serve the owner faithfully for many years.
When selecting a tool, it must be remembered that no rating reflects the whole picture. There are many models of various devices on the market and it is simply impossible to compare them all. User feedback helps to create an overall picture, but here we must remember that people are more willing to leave negative feedback than positive ones, so this information should be taken into account when choosing, but do not trust it unconditionally. The best factor is knowledge of the conditions of use and the budget on which you can count.
The selection of goods is made on the basis of reviews, opinions and opinions of users posted on various resources on the Internet. All information is taken from public sources. We do not cooperate with manufacturers and trademarks and do not call for the purchase of certain products. The article is informative.