Processing of the house from a bar: types of antiseptic preparations

The treatment of the timber with an antiseptic enables longer maintenance of the house without resorting to repairs.

In order to properly process, you need to know what and how to do it, what tools are used for special treatment, to follow the instructions for use exactly. Than to process the house built from a bar, further and we will understand.

Varieties of antiseptic preparations for wood processing

You need to connect care, selecting the appropriate composition for the antiseptic at home. Especially, experts recommend that special care be taken with regard to the means offered by manufacturers for simultaneous processing against several misfortunes. It is important to immediately warn inexperienced hosts: one universal composition against bugs, bacteria, moss and fungi has not yet been invented and does not exist in nature. In order to get rid of several reasons, antiseptic processing at home from a bar is carried out in several visits. In consultation with the professionals, you can antisepticize the log at a sufficiently high level, having a favorable effect of protecting the log. How to process a house or a log house?

All antiseptics used for processing wood are divided into two types:

1. Antiseptic preparations for impregnation. With these compounds, the antiseptic treatment of wood by means of aqueous solutions is carried out from inside the house and on the street facade, since they have no unpleasant smell. To a deeper absorption into the layers of wood have antiseptics on an organic basis. In the process of exploitation of the house to wash them is almost impossible.
2. Antiseptic preparations with foaming. They are opaque and lessiruyuschie (transparent). These compounds can be applied as a finishing layer. With the scavenging agents, a translucent film is created on the surface of the wooden walls of the house, which, under the influence of precipitation, is gradually washed away. Therefore, it is recommended from time to time to correct the exterior of the house from a bar. By resorting to the help of coating agents whose structure contains resins, it is possible to obtain a coating more complicated. However, through them, the woody texture is not visible, which completely masks the beauty of the exterior of the house from a bar.

Exterior processing of the log house and the stages of its implementation

1. After two weeks from the moment the log house was brought under the roof. If the installation of the log house was made in the summer, then after a two-week period, it is necessary to perform antiseptic treatment of wood structures, choosing for this purpose a water-based antiseptic. The treatment is carried out in two runs, as a result of which two layers of antiseptic preparation are formed on the surface of the house. If the blockhouse was erected in the cold season, then they are waiting for the temperature to be established at 10-15 degrees, and in warm conditions they produce antiseptic processing. It is advisable to use the spray gun for processing. Through processing, the timber becomes protected from the fungus that appears in the tree due to high humidity. Processing at one time allows you to create a protection month for three or four.
2. After 3-4 months from the moment of primary treatment with antiseptics of the surface of the log house, it is recommended to cover the house with a finishing coating in color. The house will receive additional protection from decay and pests. It makes sense to carry out painting once every 4 years in order to preserve the wood of the log house in perfect order.

Internal processing of the log with antiseptics

From the inside of the house, the beam is also antiseptic using aqueous solutions (simultaneously with one external treatment). After two weeks, cover the finish.

If darkening, blue or gray spots appear, they are processed with the help of special wood protection products made on the basis of chlorides. In this case, work is performed with a thin brush, provided with bristles with a natural bristle. The substance is applied to the affected areas with a thin layer. Visual observation within 5-10 minutes after processing will give evidence that the wood will again acquire the original color. One week after this type of treatment, a finish is applied to the covered areas.

Antiseptic treatment of a log house is carried out simultaneously with the most vulnerable parts of the structure: the lower rims, the subfloor, the floor lags are carefully treated. In other words, they process all the parts located in the maximum proximity with the ground.Since it is precisely in such areas with high humidity the attack of insect larvae is most possible.

What are known effective and inexpensive wood preservatives?

Antiseptic and fire protection with great effect can be carried out with relatively inexpensive drugs. For example, such: Neomid-440, BIO-Z, Liga-Bioschit, referring to the antiseptics of the younger generation. Marked drugs do well with the function of "anti-aging" wood structural parts. Neomid-440 is effective for protection against many wood species. Its use makes it possible to obtain protection of the tree for a period of about 15 years. Wood surfaces treated with modern antiseptics do not fear the harmful effects of precipitation.

The drug Phoenilax, which provides fire and bioprotection, provides the possibility of reliable protection of wood from rotting, mold, fungi and other kinds of diseases. This composition is characterized by the following properties:

• increased efficiency and minimal expenditure;
• deep penetration into the thickness of tree layers;
• aging resistance;
• does not interfere with the breathing of the tree
• there is no danger to the residents;
• they are produced in a form that is convenient for use.

The procedure for antiseptic wood

During the period of processing paste in liquid form impose on the treated surface. It is very important to monitor the overlay layer and its uniformity. The paint is abraded in advance in the paint mill. On a surface impose by means of gidrakrakopult and other devices. Thick compositions are applied with a brush. When the air temperature is about 0 degrees, it is recommended to perform heating of thick pastes up to 30 degrees.

The study of the construction standards of the SNiP "Antiseptic wooden structures" will give a deeper knowledge of all the intricacies of the process.

From the rules you can find out the main nuances of working with antiseptics and a number of other measures taken to protect the house from a wooden bar. We hope that the answer to the question of how to process the house is lit quite fully.