Chainsaw rating for quality and reliability

+ Pros Makita EA 3202 S 40 B

1. Cold start function - it is easy to start up under different weather conditions.
2. Relatively quiet sound during operation.
3. Low weight - confidently held in the hands.
4. Spring anti-vibration mechanism provides almost complete lack of recoil during operation.
5. Sensitive sensors of the return stroke - when it occurs, the saw stalls immediately and blocks the circuit.
6. Large fuel tank - there is enough fuel to do everyday work.
7. Adjustable oil supply for chain lubrication.

- Cons Makita EA 3202 S 40 B

1. Native gasoline hoses can jump off - treated by replacement.
2. When working in a horizontal position, a chain may fly off - the key for its installation must be kept with you.
3. Non-standard chain installation - requires some skill.
4. It is inconvenient to cut with the end - it is difficult to make an accurate cut.
5. It is necessary to get used to the system of protection against the return stroke - with unaccustomed saw it can stall without the occurrence of an emergency situation.
6. The drive sprocket is welded to the clutch drum, which, if necessary, replaces the repair cost.

+ Pros Partner P340S

1. Presence of primer to facilitate the start.
2. Small weight - if necessary, some time can be cut on outstretched arms.
3. Low consumption of gasoline and oil
4. Overall build quality of the engine. It is felt both in work and during storage - no oil leaks and similar problems are noticed.
5. A wide range of components - you can buy it in retail or order it online.
6. The convenient construction itself is provided with detailed instructions.
7. Good value for money when used for intended purpose.

- Cons Partner P340S

1. Back the lid and the oil supply pipe to the chain are poorly protected from the ingress of sawdust - with prolonged operation these places must be cleaned.
2. There is no oil level sensor and gasoline - you have to be guided "by eye".
3. Poor vibration protection. In addition to the impact on the hands, it affects the bolted connections of the handles - they have to be tightened periodically.
4. The chain that comes with it is advisable to replace it immediately.
5. The air filter is often clogged.
6. Only the chain and the key for its tension are included.
7. It is necessary to revise the oil supply hose to the chain - it can be transferred during assembly.

+ Pros Hitachi CS 33 EB

1. System of easy start of the engine - after running it is started up from the first or second throttle jerk.
2. A light weight of 4.2 kg makes it comfortable to work even in uncomfortable places.
3. A well-thought-out anti-vibration mechanism - except for the weight of the saw itself, nothing works on the hands.
4. Total price-quality ratio even for a household model.
5. The use of engine exhaust reduction technology is a contribution to the preservation of the environment and an additional reduction of vibration.
6. Quality of components - many owners of this saw note that it has been working for them for 5-8 years.
7. Balanced center of gravity.

- Cons Hitachi CS 33 EB

1. Lack of Russian-language instructions-you need to look separately or figure it out yourself.
2. If it heats up and stalls, until it cools, it does not start.
3. An air cleaning filter can pass fine dust into the carburetor. For treatment, it is necessary to additionally lubricate the gap between its halves.
4. There is no manual fuel injection - at the very first start, the airlock is removed for a long time - in some cases it is necessary to turn the starter for 20-30 minutes.
5. The chain in the kit is a break-in wheel - you need to re-buy the worker immediately.
6. Special attention should be paid to the tension mechanism. Before adjustment, be sure to release the tire mounts - otherwise there is a high probability of breakage.
7. Without additional adjustment, excessively high oil consumption for chain lubrication.

+ Pros Stihl MS 211

1. Reliability, quality of components and assembly.
2. Engine power is more than enough for everyday work.
3. The weight of the chainsaw is the same as that of household models.
4. A well-designed engine vibration damping system is almost imperceptible even if you put the saw on a hard surface.
5. Convenient location and opening method for gasoline and oil tanks.
6. A thoughtful chain pulling mechanism.
7. Quickly disassembled for cleaning or translation to a "camping" position.

- Cons Stihl MS 211

1. Only original oils for fuel and chain lubricants are recommended for use.
2. Exhaust gas outlet is directed upwards, so they often get in the face. If you plan a long work, it is better to wear a respirator.
3. Although the plastic case looks durable enough, it seems that it can not survive an accidental fall.
4. The factory air filter will soon have to be changed - we must immediately take the spare tire.
5. Low fuel and lubricant tanks - for long-term work, you need to take extra tanks with you.

+ Pros Husqvarna 450e

1. Powerful engine - works seamlessly with a native bus 38 cm long.
2. Reliability and durability - with the use of high-quality consumables, the already rather big lifespan significantly increases.
3. Good ergonomics - the saw is comfortable to hold in your hands at any angle.
4. Spacious fuel tank and oil tank that lubricates the chain.
5. Economical fuel consumption. Its level in the tank can be tracked through the transparent wall.
6. Spring anti-vibration system reduces the load on the hands of the operator during prolonged operation.
7. Convenient tire assembly and chain tension adjustment - made without tools.

- Cons Husqvarna 450e

1. On the market has few original components - even official dealers often have to order them in advance.
2. The increased power compared with household appliances proportionally affects the weight of the saw - it is felt during long-term work.
3. Bad protection of oil supply to the chain - requires periodic cleaning.
4. Difficult access to the adjusting screw, which adjusts the oil supply.
5. The chain that comes with the purchase will have to be replaced quickly enough.

+ Pros PATRIOT 5220

1. The powerful engine allows you to quickly cut even relatively thick trees — dry and freshly sawn.
2. Easy to maintain - easy access to items that need to be lubricated and cleaned.
3. The air filter is made of a nylon mesh - does not require replacement - only periodic flushing.
4. Good ergonomics - the saw is comfortable to hold right-handed and left-handed.
5. The anti-vibration mechanism allows working for several hours without consequences.
6. Economical consumption of gasoline - the tank lasts for 3 hours of work.
7. In terms of price and quality, it benefits most competitors.

- Disadvantages PATRIOT 5220

1. Weight 6.5 kg - tangible for long-term work. If you mostly use a saw for cutting trees, it is better to choose a lighter tool.
2. Relatively high oil consumption for chain lubrication.
3. There is no decompressor, which is felt in cold weather - it is rather difficult to pull the clockwork cable.
4. The home chain will have to be changed very soon - it is desirable to buy a spare one right away.
5. Noisy saw - without headphones it is better not to work for a long time.

+ Pros Champion 254-18

1. Despite the powerful engine, the weight of a 5.1 kg chainsaw is slightly more than that of household models.
2. Safety sensors that react to the occurrence of a kickback to lock the circuit. Antivibration mechanism.
3. The fuel tank capacity is enough for several hours of work.
4. Well-established service - in addition to spare parts in stores, on the manufacturer's website, you can find details of various product models.
5. Saw is one of the leaders in terms of price and quality.

- Cons Champion 254-18

1. The plastic of the case seems to be quite good and fits tightly, but causes a feeling of fear that it will burst if it is strongly hooked.
2. Noise at work - long use is not recommended without headphones.
3. It can periodically show off at startup.
4. Oil for lubrication of the chain runs continuously - if you need to take a break from work, then the saw should be placed on its side.
5. Inconvenient location of the oil fill hole.

+ Pros Stihl MS 361-16

1. Reliability of components and the engine as a whole. In addition to the replacement of consumables and normal wear of the drive sprocket damage is not observed.
2. The engine power of 3.4 kW combined with a tire length of 40 cm makes it possible to use the saw for most wood cutting tasks.
3. The weight of the chainsaw is 5.6 kg - not much more than the domestic models.
4. High-quality anti-vibration mechanism - it shows itself well in daily work.
5. Well-calculated fuel supply - allows you to work while holding the saw in any position and it does not stall.
6. High-quality balancing - weight and effort are distributed evenly across both hands.
7. Successful model - it has been produced for more than 10 years and during this time there has been no change in the design.

- Cons Stihl MS 361-16

1. Professional equipment requires appropriate skills - both in work and in maintenance.
2. In continuous operation, the weight of the saw is still felt - for greater efficiency, it is better to work in shifts.
3. For home use, it is better not to acquire such a saw - weight and fuel consumption for such purposes will nevertheless be a minus.
4. If you use the saw in winter time, then there is the likelihood of snow falling under the starter cover - in this case idle is lost.

+ Pros Husqvarna 357XP

1. Increased capacity of the fuel and oil tanks - 680 and 380 ml respectively .
2. The metal housing protects the internal filling from accidental impacts.
3. The presence of a decompression valve to facilitate engine start.
4. Convenient arrangement of control buttons and regulators: easy access to the chain tension screw, the cover is fastened with latches, and a high-quality air filtration system.
5. Thanks to the vibration dampening system, the saw has minimal impact on the hands.

- Cons Husqvarna 357XP

1. For household use has excessive power, respectively, and the consumption of gasoline.
2. For effective work it requires certain skills, but all the main points are written in the instructions - it’s better not to lose it.
3. The engine is demanding on the quality of gasoline - if you fill in less than 95y, the performance of the saw will decrease slightly.